Whats inside an Xbox One Chat Headset Module? Lets repair one.
My xbox one headset has been dying recently so I decided to take it apart abd possibly fix it.
I found iut that the cable near the module was broken. To repair it, I would need to cut to a good part of cable, and resolder the wires.
You can see 4 wires soldered on the pads from the top: (ground, mic, right, left). You could probably solder on. 3.5 connector and plug in any headset.
I went ahead and cut a good 2 inches of thr wire off and resoldered it, I also reheated the connectors of the big plug that im holding it by. Tested abd works good. This module does not require security screw bits.